Product Literature

Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.
31
MOVENTO
Maximum drawer thickness 16 (5/8")
Lengths available 21"
Static load capacity 135 lb
Runner comparison
Side view
Drawer box specifications
Front view
NOTE:
Drawer side material thickness may vary. Precise measurement of drawer side material
thickness should be used when calculating outside drawer width using the table below. Inside
drawer width must equal opening width minus 42 (1-21/32") for MOVENTO runners to align
and function optimally.
Calculating outside drawer width
For drawer side thickness 16 (5/8") 15 (19/32") 13 (1/2") 12 (15/32")
Deduct from opening width 10 (13/32") 12 (15/32") 16 (5/8") 18 (23/32")
Example: For 21" opening width and a 5/8" thick drawer, 21" minus 13/32" = 20-19/32" drawer width
NOTE: T59.K010M spacers, available separately, required for 15/32" and 1/2" thick sub-fronts only.
Drawer back preparation
Rear view
769R – No vertical profile
769. – Vertical profile
7 (9/32")
11 (7/16")
Ø6 x 10
Bore for hook
50 (1-15/16") Minimum rear notch
13 (1/2")
7 (9/32") Minimum
top clearance
Outside drawer width
21 (13/16") Maximum
bottom clearance depending
on cabinet bottom recess
Opening width
Opening height
Maximum height
with bin = Opening
height minus 28 (1-3/32
" )
13 (1/2")
21 (13/16")
Inside drawer width
Drawer side thickness
16 (5/8")
Drawer and Cabinet Specifications
Runner mounting specifications
Top view
NOTE:
Orange dots indicate pre-mounted screw locations. All four are required to meet specified load capacities.
433.5 (17-1/16")
30
(1-3/16")
37
(1-15/32")
546 (21-1/2")
564 (22-7/32")
15 (19/32")
30
(1-3/16")
11 (7/16")