Product Literature

© 2019 Blum, Inc. Subject to technical modifications without notice
30
MOVENTO
Optional TIP-ON BLUMOTION
Enables MOVENTO drawers to be opened with just a light touch
of the drawer front and retain BLUMOTION soft closing action
Fully mechanical motion
Can be used with or without pulls
Minimum opening width 281 (11-1/16")
pages 14 - 19
Runner
Locking device
Run
ner
Locking device
Drawer length
Description
Basic Components
Application
MOVENTO bottom mount runner set
One set required per drawer
Set includes:
1
MOVENTO heavy duty runner set with pre-mounted
#6 x 1" wood screws for installation (qty 8)
2
Standard locking device (qty 2) with #6 x 5/8” wood screws for
installation (qty 4)
Interior roll-outs and roll-out shelf applications must be mounted to
the bottom of the cabinet or to a fixed shelf/panel
Overall cabinet
depth
Drawer length MOVENTO set
610 (24") 533 (21")
769R5330S
NOTE:
These runners are for 16 (5/8") drawer side thickness
NOTE: Pre-attached 1/4" spacers should not be removed. Cabinet bottom recess must be 6 (1/4") or less.
NOTE: Lateral stabilizer cannot be used with 769R series runners.
Components
2
1
Bottom Mount Drawer – Heavy Duty
Optional SERVO-DRIVE waste/recycle set
SERVO-DRIVE is a low-voltage electric touch-to-open and
open assist solution.
Set includes:
Part no.
SERVO-DRIVE waste/recycle set
Z10NA30UGUS
NOTE:
Power supply will operate up to two drive units in a double
bottom bracket application (second drive unit sold separately)
2
required
per
drawer
1
MOVENTO heavy duty full extension
concealed runners with BLUMOTION
13 (1/2") to 16 (5/8") drawer thickness
19 (3/4") over extension
For face frame and frameless applications
Tool-free side-to-side, height and tilt
adjustment
Maximum 6 (1/4") cabinet bottom recess
135 lb static load capacity
Designed to be used with SERVO-DRIVE or
TIP-ON BLUMOTION
Installation instructions
Drive unit (pre-attached)
Double bottom bracket with #6 x 1" wood screws (qty 2)
Adapter plate
110 volt plug-in power supply with six feet of universal cable
Screw-on distance bumpers (qty 4) with #6 x 5/8" wood screws
for installation (qty 8)
INSERTA cable connector
Cable end protectors (qty 2)
Cable clips (qty 4)
Installation template, instructions and user manual