Product Literature

© 2019 Blum, Inc. Subject to technical modifications without notice
24
MOVENTO
Description
▬ Uses the same 763 or 769 series runner
▬ Requires increased setback of the runner
▬ 763H/. and 769. frame applications require
blocking-out behind the face frame
Specications
TIP-ON BLUMOTION depth adjustment
Top view
763H/. and 769. (X = runner setback + 32 (1-1/4"))
769R (X = runner setback + 17.5 (11/16"))
NOTE: See runner setback information on next page
Inside cabinet depth
Side view
NOTE:
See runner setback information on next page
Optional add-on depth adjustment without TIP-ON BLUMOTION
One set per drawer
▬ Depth adjustment ±2 (3/32"), preset at 0
▬ Integrated 3 (1/8") distance bumper for inset or overlay
SERVO-DRIVE applications
▬
Not for use with TIP-ON BLUMOTION
Set includes:
▬ Right and left add-on depth adjustment
▬ Installation Instructions
Part no.
Add-on depth adjustment
298.7600
Installation screw
606N or 606P
763H/. and 769. setback information
Side view
NOTE:
For mounting hole position add 7 (9/32") to runner setback
769R setback information
Top view
NOTE:
For mounting hole position add 22 (7/8") to runner setback
Runner setback (see table)
Trial recommended
Blocking behind frame
Inside cabinet depth
Minimum = Runner length + Setback + 6 (1/4")
Mounting hole position
Runner setback
Inset Drawer
NOTE: Runner cannot be
mounted below opening
Runner setback
Mounting hole position
Drawer sub-front
Drawer front
+
–
2
1
x
Combination square
Cabinet face
Runner setback
+
-
+
-