Product Literature

Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.
23
MOVENTO
Step 2 – Slide gear racks into pinion housings
Step 6 – Press pinion adapters into linkage rod
Step 4 – Cut gear racks to length
Step 3 – Install gear racks
Insert locating tabs into cut-outs on bottom of runners
Slide backward to lock into place
Step 1 – Attach left and right pinion housings
Insert locating pins into MOVENTO runner
Press orange locking clips to lock into place
click
click
G
ear rack length
The rear bracket moves to
accommodate up to 686 (27")
length MOVENTO runners
Gear rack length
763x3050x
331 (13-1/32")
763x3810x
407 (16-1/32")
76xx4570x
483 (19-1/32")
76xx5330x
560 (22-1/16")
769x6100x
637 (25-3/32")
769x6860x
712 (28-1/32")
click
Step 5 – Cut linkage rod to length
Pinion housing
Opening width minus
318 (12-17/32")
Opening width
Linkage rod
Pinion adapter
Pinion adapter
Installation Instructions
Step 8 – Install locking clips
Install locking clips on both adapters
Step 7 – Install linkage rod assembly
Close drawer runners
Slide right pinion adapter onto right pinion
Slide linkage rod assembly left onto left pinion
Locking clip
Linkage rod assembly
1
1
1
1
1
1
1
1
2
2
2
2
3
3
2
2