Product Literature

Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.
17
MOVENTO
Required Parts
TIP-ON BLUMOTION synchronization
2
▬ To be used with the T60L1118W
synchronization rod
Part no.
Synchronization adapters
T60.000D
TIP-ON BLUMOTION synchronization for narrow applications
2/3
▬ Opening width:
Minimum = 281 (11-1/16")
Maximum = 305 (12")
▬ Length 64 (2-1/2"), cut to size
Part no.
Sync. rod
T60.300D.22
3
▬ Opening width:
Minimum = 314 (12-3/8")
Maximum = 1385 (54-1/2")
▬ Length 1118 (44-1/32"), cut to size
Part no.
Synchronization rod
T60L1118W
NOTE: A synchronization rod is recommended for all cabinet widths
for optimal function
Do not use bumpers, as this can inhibit the function of TIP-ON
BLUMOTION when the drawer front is pressed.
Transportation
To prevent damage to pre-assembled furniture during transportation:
a) clamp a spacer between front and
cabinet or
b) adjust the front gap to 0 mm or
NOTE: Front gap will have to be readjusted
during installation
c) transport without latch
0
0
min. 5mm
TIP-ON BLUMOTION for MOVENTO front gap template
NOTE: Not for use with 769R
series runners
▬ For creating a 3.5 (1/8")
front gap
▬ For use with TIP-ON
BLUMOTION for MOVENTO
only
Part no.
65.5632.US
Drawer back preparation
Rear view
NOTE:
Wider notches required to accommodate TIP-ON
BLUMOTION units
7 (9/32")
11 (7/16")
Ø6 x 10
bore for hook
125 (4-15/16") minimum rear notch
13 (1/2")