Product Literature

Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.
13
MOVENTO
Drawer box specifications
Front view
NOTE: Drawer side material thickness may vary. Accurate measurement of drawer side
material thickness should be used when calculating outside drawer width using the table
below. Inside drawer width must equal opening width minus 42 (1-21/32") for MOVENTO
runners to align and function optimally.
Calculating outside drawer width
For drawer side thickness
16 (5/8") 15 (19/32") 13 (1/2") 12 (15/32")
Deduct from opening width
10 (13/32") 12 (15/32") 16 (5/8") 18 (23/32")
Example: For 21" opening width and a 5/8" thick drawer, 21" minus 13/32" = 20-19/32" drawer width
Drawer back preparation
Rear view
7 (9/32")
11 (7/16")
Ø6 x 10
Bore for hook
50 (1-15/16") Minimum rear notch
13 (1/2")
Drawer and Cabinet Specifications
Drawer side thickness
16 (5/8")
13 (1/2")
Bottom recess
16 (5/8")
Bottom clearance
38
(1-1/2")
Opening width
Opening height
Opening width minus 42 (1-21/32")
21 (13/16")
Outside drawer width
7 (9/32")
Minimum top
clearance
Maximum
drawer height =
opening minus
23 (29/32")
606N or 606P
Screws
or
662.1150.HG
Runner mounting specifications
Side view Runner close-up
NOTE: Elongated holes are for ±4.5 (3/16")
depth adjustment only. Additional screws
must be used to secure the runner to the
cabinet.
NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings
NOTE: If using 15/32" or 1/2" drawer thickness without T59.K010M, subtract 3 (1/8") from setback and screw locations.
MOVENTO
Drawer
length
Minimum inside
cabinet depth
Runner
length
Screw location
AB
769.7620S
762 (30") 782 (30-13/16") 773 (30-7/16") 261 (10-9/32") 389 (15-5/16")
769.6860S
686 (27") 706 (27-13/16") 697 (27-7/16") 261 (10-9/32") 389 (15-5/16”)
769.6100S
610 (24") 630 (24-13/16") 621 (24-7/16") 261 (10-9/32") 389 (15-5/16")
769.5330S
533 (21") 553 (21-13/16") 544 (21-7/16") 261 (10-9/32") 357 (14-1/16")
769.4570S
457 (18") 477 (18-13/16") 468 (18-7/16") 261 (10-9/32") 357 (14-1/16")
NOTE: 24", 27", and 30" length MOVENTO runners must be raised 3 (1/8") for inset face frame applications
38 (1-1/2")
26 (1-1/32")
20.5 (13/16")
9 (11/32") Typical
7 (9/32")
34 (1-11/32")
32 (1-1/4")
Blocking for
frame applications
3 (1/8") Setback
Inside cabinet depth
Runner length
10 (13/32")
37 (1-15/32")
A
B
9 (11/32")
32 (1-1/4")
Maximum drawer thickness 16 (5/8")
Lengths available 18" - 30"
Static load capacity 170 lb
Runner comparison
Side view
769.
763H
NOTE:
Standardized hole locations