Product Literature

© 2019 Blum, Inc. Subject to technical modifications without notice
12
MOVENTO
Application
▬ Full extension concealed runners
▬ Frameless or blocked-out face frame cabinets
▬ BLUMOTION soft closing
▬ Smooth running action
▬ Available in 18" to 30" lengths
▬ 13 (1/2") to 16 (5/8") drawer thickness
▬ Compatible with TIP-ON BLUMOTION and
SERVO-DRIVE
Description
Features
Basic Components
MOVENTO 769. Heavy Duty
▬ Four-dimensional adjustment
▬ Elongated holes for depth adjustment
▬ 170 lb static load capacity
Runner
Locking device
Run
ner
Locking device
Drawer length
Standard locking device with side-to-side adjustment
▬ One right and one left required per drawer
▬ Captive right and self-aligning left device
▬ Self-adjusting drawer length tolerance
▬ Steel base with synthetic, spring-loaded
release levers
▬ Minimum inside drawer width 170 (6-11/16")
▬ Side-to-side adjustment ±1.5 (1/16")
▬ For use with MOVENTO runners only
▬ For other options see page 26
Part no.
Right locking device
T51.7601 R
Installation Left locking device
T51.7601 L
page 7
Installation screw
606N or 606P
Runner set
One set required per drawer
For overall
cabinet depth
Drawer
length
MOVENTO
838 (33") 762 (30")
769.7620S
762 (30") 686 (27")
769.6860S
686 (27") 610 (24")
769.6100S
610 (24") 533 (21")
769.5330S
533 (21") 457 (18")
769.4570S
Wood screw for installation
606N or 606P
System screw for installation
662.1150.HG
Components
Optional TIP-ON BLUMOTION
▬ Enables MOVENTO drawers to be opened with just a light touch
of the drawer front and retain BLUMOTION soft closing action
▬ Fully mechanical motion
▬ Can be used with or without pulls
▬ Minimum opening width 281 (11-1/16")
page 14 - 19
NOTE: For 769. series runners, rear brackets and sockets cannot
be used. Cabinet sides must be blocked-out flush with the inside of
the frame. See page 13.
Part no.
T59.K010M
6064N
Installation screw
▬ Works with MOVENTO locking devices
▬ 12 (15/32") and 13 (1/2") sub-fronts only
Locking device spacer for thin fronts