MOVENTO The Evolution of Motion
MOVENTO MOVENTO is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer runners in the 1960s. Standard with soft close BLUMOTION, MOVENTO runners provide multiple solutions with a single runner. Combine with our motion technologies, TIP-ON BLUMOTION or SERVO-DRIVE, to ensure drawers open with a light press of the front and close softly and quietly.
Contents MOVENTO 4 General Specifications 6 Using MOVENTO 8 MOVENTO 763H Standard Duty 10 MOVENTO 763. Standard Duty 12 MOVENTO 769. Heavy Duty 14 TIP-ON BLUMOTION for MOVENTO 20 Bottom Mount Drawer – Standard Duty 22 Lateral Stabilizer for 763H/. and 769.
MOVENTO Complete Runner System ▬ Full extension concealed runners standard with BLUMOTION soft close ▬ Designed to be used with TIP-ON BLUMOTION or SERVO-DRIVE touch-to-open system ▬ Zinc-coated steel ▬ Concealed roller carriage with permanently lubricated synthetic rollers ▬ Available in standard and heavy duty ▬ Designed for drawers using 1/2" to 5/8" drawer material thickness ▬ Bottom mount holes on 763.
MOVENTO General Specifications Front side-to-side adjustment 1 Rear side-to-side adjustment 2 Rotate side-to-side adjustment left or right equally on both locking devices. Drawer front moves in the same direction as rotation. After front side-to-side adjustment is made with the locking devices, rotate the rear side-to-side adjustment left or right to re-align the back of the drawer box with the front. Drawer back moves in the same direction as rotation. T51.7601.
MOVENTO Using MOVENTO Step 1 Measure cabinet opening Frameless Cabinet Frame Cabinet Cabinet opening measurements are needed to determine drawer box size. pth De pth Height Height De NOTE: In face frame applications, cabinet sides must be blocked-out flush with the inside of the face frame. Wi Wid dth th Step 2 Preparing drawer boxes Build drawers according to the specifications given for the MOVENTO runners you chose and the measurements determined in Step 1.
Drawer Preparation MOVENTO Rear Notching Dimensions Option – no notching Rear view 13 (1/2") 50 (1-15/16") Minimum rear notch Drawers must be notched in the back to accommodate MOVENTO runners The notches must be flush with the drawer sides and bottom Make the back panel shorter and extend the drawer bottom to the back of the drawer Rear Boring Dimensions Boring Rear view 1 Place template over the drawer side 2 Position template so that the center rib rests 7 (9/32") against the inside face of
MOVENTO MOVENTO 763H Standard Duty Application Features ▬ ▬ ▬ ▬ Basic Components Four-dimensional adjustment Elongated holes for depth adjustment Bottom mount holes 125 lb static load capacity Dra r we len gth Description ▬ ▬ ▬ ▬ ▬ ▬ ▬ Full extension concealed runners Face frame or frameless cabinets BLUMOTION soft closing Smooth running action Available in 12" to 21" lengths 13 (1/2") to 16 (5/8") drawer thickness Compatible with TIP-ON BLUMOTION and SERVO-DRIVE Locking device Runner Runn Com
Drawer and Cabinet Specifications Maximum drawer thickness 16 (5/8") Lengths available 12" - 21" Static load capacity 125 lb Drawer box specifications MOVENTO Drawer back preparation Opening width Front view 7 (9/32") Minimum top clearance Outside drawer width Rear view 7 (9/32") 21 (13/16") Maximum drawer height = opening minus 23 (29/32") Drawer side thickness 16 (5/8") (1-1/2") 38 Screws 606N or 606P or 662.1150.
MOVENTO MOVENTO 763.
Drawer and Cabinet Specifications Maximum drawer thickness 16 (5/8") Lengths available 12" - 21" Static load capacity 125 lb Drawer box specifications MOVENTO Drawer back preparation Opening width Front view 7 (9/32") Minimum top clearance Outside drawer width Rear view 7 (9/32") Opening width minus 42 (1-21/32") Maximum drawer height = opening minus 23 (29/32") Drawer side thickness 16 (5/8") 11 (7/16") Opening height 21 (13/16") (1-1/2") 38 Screws 606N or 606P or 662.1150.
MOVENTO MOVENTO 769.
Drawer and Cabinet Specifications Maximum drawer thickness 16 (5/8") Lengths available 18" - 30" Static load capacity 170 lb Drawer box specifications MOVENTO Drawer back preparation Opening width Front view 7 (9/32") Minimum top clearance Outside drawer width Rear view 7 (9/32") Opening width minus 42 (1-21/32") 21 (13/16") (1-1/2") 38 Maximum drawer height = opening minus 23 (29/32") Drawer side thickness 16 (5/8") 662.1150.
Simple, Tool-Free Assembly The TIP-ON BLUMOTION unit can be assembled tool-free. Reliable Function TIP-ON BLUMOTION remains functional at all times. Even if the drawer is manually pulled open or pushed closed, TIP-ON BLUMOTION works great the next time it's needed. 14 © 2018 Blum, Inc.
TIP-ON BLUMOTION for MOVENTO TIP-ON BLUMOTION for MOVENTO provides flexibility by offering the TIP-ON BLUMOTION unit in four different strengths. Use the table below to select the appropriate unit and trigger by finding your drawer runner length and estimating the total weight of the drawer when loaded. A synchronization rod is recommended for all cabinet widths for optimal function.
MOVENTO TIP-ON BLUMOTION for MOVENTO Description Application ▬ Enables MOVENTO drawers to be opened with just a light touch of the drawer front ▬ Same installation dimensions as MOVENTO ▬ Fully mechanical motion ▬ Smooth running action ▬ Four-dimensional adjustment ▬ Load capacity of runner remains unchanged ▬ Can be used with or without pulls ▬ Frameless or blocked out face frame applications Components 1 1 2 3 2/3 NOTE: Parts are identified below and on the next page TIP-ON BLUMOTION for MOVENTO Se
Required Parts TIP-ON BLUMOTION synchronization TIP-ON BLUMOTION synchronization for narrow applications ▬ To be used with the T60L1118W synchronization rod 2 MOVENTO ▬ Opening width: Minimum = 281 (11-1/16") Maximum = 305 (12") ▬ Length 64 (2-1/2"), cut to size 2/3 Part no. Sync. rod ▬ Opening width: Minimum = 314 (12-3/8") Maximum = 1385 (54-1/2") ▬ Length 1118 (44-1/32"), cut to size 3 Part no. T60.
MOVENTO 1 TIP-ON BLUMOTION Installation and Adjustment 2 Extend the runners Attach the trigger 1 click 2 click 2 1 3 5 4 Attach the TIP-ON BLUMOTION unit Close the runners Use the front gap template min 3.5 1 3 3.5 + 2 NOTE: Using the 65.5632.US front gap template is highly recommended. Adjust left and right runner. NOTE: If using 15/32" or 1/2" drawer thickness without T59.K010M, 13 (1/2") text should be visible instead.
MOVENTO TIP-ON BLUMOTION Installation and Adjustment 9a 9b 10 11 Must push both runners simultaneously Removal 1 2 Push on drawer front to open 3 4 5 Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.
MOVENTO Bottom Mount Drawer – 763H Standard Duty Description Application Basic Components ▬ Use 763H series runners ▬ Face frame or frameless cabinets ▬ Application is possible with any MOVENTO locking device ▬ 13 (1/2") to 16 (5/8") drawer thickness ▬ 125 lb static load capacity ▬ Heavy duty bottom mount application possible with 769R runners on pages 28 - 31 D e r aw r le ng th Runner Runn Locking device Components Runner set One set required per drawer Maximum drawer material thickness 16
MOVENTO Bottom Mount Drawer – 763. Standard Duty Description Application Basic Components ▬ Use 763.
MOVENTO Lateral Stabilizer for 763H/. and 769.
MOVENTO Installation Instructions Step 2 – Slide gear racks into pinion housings Step 1 – Attach left and right pinion housings 1 Insert locating pins into MOVENTO runner 2 Press orange locking clips to lock into place 1 Pinion housing 2 click Step 3 – Install gear racks Step 4 – Cut gear racks to length 1 Insert locating tabs into cut-outs on bottom of runners 2 Slide backward to lock into place rr ac k le ng 1 2 G ea click th click The rear bracket moves to accommodate up to 686 (27") l
MOVENTO Inset Drawer Description ▬ Uses the same 763 or 769 series runner ▬ Requires increased setback of the runner ▬ 763H/. and 769.
MOVENTO Runner Setback Specifications Runner setback with all locking devices Runner setback 769R 13 (1/2") 16 (5/8") 19 (3/4") 22 (7/8") 16 (5/8") 19 (3/4") 22 (7/8") 25 (31/32") 19 (3/4") 22 (7/8") 25 (31/32") 28 (1-3/32") 16 (5/8") 19 (3/4") 22 (7/8") Sub-front thickness Sub-front thickness 763H/. and 769. Runner setback 13 (1/2") 30.5 (1-3/16") 33.5 (1-5/16") 36.5 (1-7/16") 16 (5/8") 33.5 (1-5/16") 36.5 (1-7/16") 39.5 (1-9/16") 19 (3/4") 36.5 (1-7/16") 39.5 (1-9/16") 42.
MOVENTO Locking Devices Standard One right and one left required per drawer ▬ ▬ ▬ ▬ ▬ Captive right device and self-aligning left device Self-adjusting drawer length tolerance Steel base with synthetic, spring-loaded release levers Minimum inside drawer width 170 (6-11/16") Side-to-side adjustment ±1.5 (1/16") Part no. Right locking device Left locking device Installation screw T51.7601 R T51.
MOVENTO Rear Attachment Options Screw-on bracket For MOVENTO 763H series runners Lateral self-alignment 3 (1/8") Non-handed, one-piece stamped steel design, zinc-coated Use at least three #6 wood screws Not for use with TIP-ON BLUMOTION Face frame stile 21 (13/16") 32 (1-1/4") ▬ ▬ ▬ ▬ ▬ 3 (1/8") 16 (5/8") Two required per drawer 26 14 (1-1/32") (9/16") 11.6 (15/32") Face frame rail Part no. NOTE: Illustration is for 763H series Screw-on bracket 295.3750.
MOVENTO Waste/Recycle Drawer with Motion Technologies Application Description Basic Components ▬ Pre-assembled bottom mount set ▬ MOVENTO heavy duty full extension concealed runners with BLUMOTION ▬ For 12", 15" and 18" minimum opening widths ▬ 13 (1/2") to 16 (5/8") drawer thickness ▬ 19 (3/4") over extension ▬ For face frame and frameless applications ▬ Tool-free side-to-side, height and tilt adjustment ▬ Maximum 6 (1/4") cabinet bottom recess ▬ 135 lb static load capacity ▬ Compatible with TIP-ON BL
Drawer and Cabinet Specifications Maximum drawer thickness MOVENTO 16 (5/8") Lengths available 21" Static load capacity 135 lb Drawer box specifications Important Front view Opening width 7 (9/32") Minimum top clearance Bin width and height must be considered when designing your cabinet (see the diagram on the left).
MOVENTO Bottom Mount Drawer – Heavy Duty Application Description Basic Components ▬ MOVENTO heavy duty full extension concealed runners with BLUMOTION ▬ 13 (1/2") to 16 (5/8") drawer thickness ▬ 19 (3/4") over extension ▬ For face frame and frameless applications ▬ Tool-free side-to-side, height and tilt adjustment ▬ Maximum 6 (1/4") cabinet bottom recess ▬ 135 lb static load capacity ▬ Designed to be used with SERVO-DRIVE or D e r aw r le ng th TIP-ON BLUMOTION Locking device Runner Components
Drawer and Cabinet Specifications Maximum drawer thickness MOVENTO 16 (5/8") Lengths available 21" Static load capacity 135 lb Drawer back preparation Drawer box specifications Front view Rear view Opening width 7 (9/32") Minimum top clearance Outside drawer width Inside drawer width 7 (9/32") Ø6 x 10 Bore for hook Maximum height with bin = Opening height minus 28 (1-3/32") 21 (13/16") Opening height 11 (7/16") 13 (1/2") 50 (1-15/16") Minimum rear notch Drawer side thickness 16 (5/8") Runne
MOVENTO ORGA-LINE Accessories ORGA-LINE for Top Drawers With this adjustable organization system, everything is stored where it can be seen. Specifically designed for MOVENTO, it fits in the space you have and can be rearranged to store the items you need. The customizable system is made of stainless steel trays and dividers, making it easy to adapt to any drawer configuration. The trays are also dishwasher safe, so keeping them clean is easy. blum.
ORGA-LINE Accessories MOVENTO ORGA-LINE for Deep Drawers A Interior side rail C ▬ Two required ▬ Length 475 (18-11/16") ▬ Height 131 (5-3/16") B Part no. Interior side rail ZHI.533SS65 B Cross divider ▬ ▬ ▬ ▬ D Length 1077 (42-3/8"), cut to size Inside drawer width minus 62 (2-7/16") Height 113 (4-1/2") Gray A Part no. Cross divider C Spring loaded connector Z40H1077A D Lateral divider ▬ Two required ▬ Length 100 (3-15/16") ▬ Height 116 (4-9/16") ▬ Dust gray ▬ Gray Part no.
MOVENTO Assembly Aids & Tools Universal individual template ▬ Used to pre-bore holes for MOVENTO and TANDEM runners ▬ Also used for making/pre-boring other Blum drawer systems, AVENTOS locating pins, hinge mounting plates, BLUMOTION adapters, and TIP-ON adapters ▬ Calibrated scale for accurate setting Set includes: ▬ Universal individual template ▬ Ø2.5 and Ø5 stop collars ▬ Allen wrench Part no. 65.1051.
Assembly Aids & Tools MOVENTO Deep thread wood screw Truss head wood screw ▬ Pilot bore Ø5 (3/16") hole ▬ Pilot bore Ø2.5 (3/32") hole ▬ Pilot bore Ø2.5 (3/32") hole Ø5 Deep thread system screw Part no. #6 x 5/8", #2 Phillips Part no. #6 x 11.5, #2 POZI 662.1150.HG 606N 606P #6 x 5/8", #2 POZI #6 x 3/4", #2 Phillips 6064N Part no.
MOVENTO 36 © 2019 Blum, Inc.
Part Number Index Part No. Page No. Part No. MOVENTO Page No. 295.3750.02 27 T60L7540 16 295.6400 27 T60L7570 16 295.6410 27 T60L7570.B 28 298.7600 24 T60L7570.D 28 6064N 35 T60L7570.F 28 606N 35 T65.1600.01 34 1.5 606P 35 T65.9000 34 612TH 35 Z10NA30UGUS 28, 30 65.1000.01 34 Z40H000A 33 65.1001.01 34 Z40H1077A 33 Conversion chart mm 1 inch 1 /32 .031 1 16 .063 2 3 /32 .094 3 1 /8 .125 4 5 /32 .156 /16 .188 /32 .219 / 65.1051.
Why Choose Blum Blum, Inc. is a leading manufacturer of functional hardware for the kitchen cabinet and commercial casework industries specializing in lift systems, concealed hinges and drawer runner systems. Virtually all of the hardware needed to assemble and make cabinets functional is available within the wide range of quality Blum products. Blum supports the U.S.
Blum, Inc. 7733 Old Plank Rd. Stanley, NC 28164 800-438-6788 blum.com Please visit blum.com for information on other Blum products LIT.MOV1000.10.19 Ident. 26357390 © 2019 Blum, Inc.
