Product Literature
© 2019 Blum, Inc. Subject to technical modifications without notice
30
MOVENTO
Optional TIP-ON BLUMOTION
 ▬ Enables MOVENTO drawers to be opened with just a light touch 
of the drawer front and retain BLUMOTION soft closing action
 ▬ Fully mechanical motion
 ▬ Can be used with or without pulls
 ▬ Minimum opening width 281 (11-1/16") 
pages 14 - 19
Runner
Locking device
Run
ner
Locking device
Drawer length
Description
Basic Components
Application
MOVENTO bottom mount runner set
One set required per drawer
Set includes:
1
MOVENTO heavy duty runner set with pre-mounted
 #6 x 1" wood screws for installation (qty 8)
2
Standard locking device (qty 2) with #6 x 5/8” wood screws for        
installation (qty 4)
Interior roll-outs and roll-out shelf applications must be mounted to 
the bottom of the cabinet or to a fixed shelf/panel
Overall cabinet 
depth
Drawer length MOVENTO set
610 (24") 533 (21")
769R5330S
NOTE: 
These runners are for 16 (5/8") drawer side thickness
NOTE: Pre-attached 1/4" spacers should not be removed. Cabinet bottom recess must be 6 (1/4") or less.
NOTE: Lateral stabilizer cannot be used with 769R series runners.
Components
2
1
Bottom Mount Drawer – Heavy Duty
Optional SERVO-DRIVE waste/recycle set
SERVO-DRIVE is a low-voltage electric touch-to-open and 
open assist solution.
Set includes:
Part no.
SERVO-DRIVE waste/recycle set
Z10NA30UGUS
NOTE:
 Power supply will operate up to two drive units in a double
bottom bracket application (second drive unit sold separately)
2
required
per
drawer
1
 ▬ MOVENTO heavy duty full extension 
concealed runners with BLUMOTION 
 ▬ 13 (1/2") to 16 (5/8") drawer thickness
 ▬ 19 (3/4") over extension 
 ▬ For face frame and frameless applications 
 ▬ Tool-free side-to-side, height and tilt 
adjustment 
 ▬ Maximum 6 (1/4") cabinet bottom recess 
 ▬ 135 lb static load capacity
 ▬ Designed to be used with SERVO-DRIVE or 
TIP-ON BLUMOTION 
 ▬ Installation instructions 
 ▬ Drive unit (pre-attached)
 ▬ Double bottom bracket with #6 x 1" wood screws (qty 2)
 ▬ Adapter plate 
 ▬ 110 volt plug-in power supply with six feet of universal cable
 ▬ Screw-on distance bumpers (qty 4) with #6 x 5/8" wood screws 
for installation (qty 8)
 ▬  INSERTA cable connector
 ▬ Cable end protectors (qty 2)
 ▬ Cable clips (qty 4)
 ▬  Installation template, instructions and user manual 










