Product Literature

© 2019 Blum, Inc. Subject to technical modifications without notice
26
MOVENTO
Locking Devices
Standard
One right and one left required per drawer
▬ Captive right device and self-aligning left device
▬ Self-adjusting drawer length tolerance
▬ S teel base with synthetic, spring-loaded release levers
▬ M inimum inside drawer width 170 (6-11/16")
▬ Side-to-side adjustment ±1.5 (1/16")
Part no.
Right locking device
T51.7601 R
Left locking device
T51.7601 L
Installation screw
606N or 606P
Vertical mount
One right and one left required per drawer
▬ Vertical mount locking device used to minimize sub-front splitting
▬ Captive right device and self-aligning left device
▬ Self-adjusting drawer length tolerance
▬ Steel base with synthetic, spring-loaded release levers
▬ M inimum inside drawer width 170 (6-11/16")
▬ Side-to-side adjustment ±1.5 (1/16")
▬ Minimum sub-front thickness 16 (5/8")
▬ Designed for 13 (1/2") drawer bottom recess
Part no.
Right locking device
T51.7601.20 R
Left locking device
T51.7601.20 L
Installation screw
606N or 606P
Narrow drawer
One right and one left required per drawer
▬ For use with narrow drawers
▬ Maximum dynamic load capacity 25 lb
▬ Captive right device and self-aligning left device
▬ Self-adjusting drawer length tolerance
▬ Vertical mount, two-piece nylon
▬ Min
imum inside drawer width 95 (3-3/4") without TIP-ON BLUMOTION
▬ Minimum sub-front thickness 16 (5/8")
▬ Designed for 13 (1/2") drawer bottom recess
Part no.
Right locking device
T51.0501.20 R
Left locking device
T51.0501.20 L
Installation screw
606N or 606P
Locking device spacer for thin fronts
Part no.
T59.K010M
6064N
Installation screw
▬ Works with MOVENTO locking devices
▬ 12 (15/32") and 13 (1/2") sub-fronts only