User Manual

B

O8
7
O
1 2 1 2
3
4
2
5
7
8
6
Guides for boring O8 holes
6.09-01
Guides for
O holes
Centerline
locators
O ange
ts in
pre-bored
hole
M4 x 25mm
spacer screws
included
Adjustable
10
1
9. 1.
- For installing Blum hinges with INSERTA or
EXPANDO cups
- For boring Ø8mm dowels after Ømm hole is bored
- Boring distance adjusts from  to 8mm
- Template for boring Ømm holes for system screw
mounting plates
- Includes drill bushing to pilot bore Ø.mm for wood
screw plates
PlateMate
- Boring template for all Blum face frame adapter plates
- Clamps to the frame with cam lever
- Adjustment knob accommodates frame thickness of /8" to 1"
- Spacer screws permit quick use without measuring
- Includes:
- .mm pilot bit and drill bit extension
- reversible bushing insert for mm hole spacing (for 17L6xxx)
- reversible bushing insert for 0mm hole spacing (for 17H6xxx)
- bushings reverse from 9.mm to 1.mm setback
PlateMate
65.5030.01
Ø2.5mm drill bit DB-2.5mm
Using the PlateMate
INSERTA boring template
INSERTA boring template
65.0590
Ø8mm drill bit
DB-8mm
Ø5mm drill bit
DB-5mm
Boring pilot holes for inset face frame adapter plate Boring pilot holes for overlay face frame adapter plate
Using the INSERTA boring template for hinges
Using the INSERTA boring template for mounting plates
Two rotating cams provide seven
boring settings for hinge cups
Set boring distance, position in
hole and bore Ø8mm dowel holes
Prebore door with Ømm bit Drill holes for mounting plates
with Ø or Ø.mm bit
Position template on centerline
Part No.
Part No.
78
Subject to technical modications without notice. © 007
Assembly aids
All dimensions in millimeters (inch equivalents as shown).
www.cabinetparts.com
Cabinetparts.com