User Manual

0

7

76
Subject to technical modications without notice. © 007
Assembly aids
All dimensions in millimeters (inch equivalents as shown).
Holes are:
mm apart,
7mm setback
7

ECOJIG boring template for mounting plates
- Use to bore Ømm holes for mounting plates that are mounted
with system screws, EXPANDO dowels or INSERTA
- Ømm stop collar included
1
3
2 5
4
Stop collar
ECOJIG
65.5070
Ø5mm bit
DB-5mm
Using the ECOJIG
Mark hinge center line, or hinge arm outline,
on cabinet side panel
Mounting plate template
Mounting plate template
65.5300
- Use with CLIP or MODUL mounting plates on
overlay applications on panel cabinets
- Simple location of mounting plate screw positions
- Transfers measurements from door to cabinet
- If mounting plates are standard, multiple templates can be
attached to a wooden strip
- Pilot bores Ø.mm holes for wood screws
- For wing plates or 17H100.0 In-line plate
Flip template over
and seat locator pin
into top hole
Drill the bottom
Øm
m hole
Install INSERTA,
EXPANDO or system
screw mounting plate
Align template
with marks and
d
rill top Ømm hole
Part No.
Part No.
www.cabinetparts.com
Cabinetparts.com