Installation Manual

Subject to technical modifications without notice.
Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
1
New side adjustment New rear side adjustment
Rotate side adjustment left or right equally
on both locking devices. Drawer front moves
in the same direction as rotation.
After front side adjustment is made with the
locking devices, rotate the rear side adjustment
left or right to re-align the back of the drawer
box with the front. Drawer back moves in the
same direction as rotation.
Maximum 1.5 (1/16") to left or right on both front and rear (tool-free)
NOTE: Side adjustment not available on T51.x8xx locking devices
Height adjustment Tilt adjustment
Press up on adjustment tab
Push towards back of drawer
Maximum 3 (1/8") rise of drawer front (tool-free)
Rotate the tilt adjustment lever on the rear of
each runner to lift the back of the drawer and
tilt the top of the drawer front forward.
Maximum 5 (3/16") rise of drawer back (tool-free)
NOTE: Height and tilt adjustments available with all combinations of locking devices and runners
Full extension concealed drawer runners
Basic components Locking devices Runners Rear attachment options
TANDEM plus BLUMOTION 563H/563. installation instructions
Depth adjustment on runner
TANDEM 563 runners feature elongated holes
that allow
±
4.5 (3/16") depth adjustment
New depth adjustable locking device
Locking device
with side, height and
depth adjustment
Turning the adjustment screw allows
for up to a
+
2.5 (3/32") out adjustment
NOTE: For T51.1901.PS setback in inset
applications, see page 5
R
L
R
L
drawer
front
L
R
L R
T51.1901.PS
1
2
1
2
0
BLUMOTION
inside
1 2
0