Installation Guide

ManualsBrandsBlum ManualsCabinet HardwareTIP-ON Set for Large Cabinet Doors with Height Exceeding 48 Inches

Hinges

TIP-ON for doors

Opening comfort for doors without handles

Doors can be opened easily with TIP-ON – a light touch is all that's needed

▀ Designed for panel or face frame (blocked out) cabinet applications

▀ Works with CLIP top BLUMOTION, CLIP top, CLIP, COMPACT

BLUMOTION and COMPACT

▀ Can be bored into the side panel or used with an adapter plate

▀ Easy depth adjustment for proper door gap setting

▀ Works for both overlay and inset applications

▀ Quick and easy installation

▀ Increased design options

▀ Requires minimal force to open and close

Mounting

The TIP-ON unit can be either

bored into the cabinet end panel

or a attached to the cabinet interior

using adapter plates.

Catch plate

The catch plate is the counterpart

to TIP-ON. It is available in self-

adhesive or screw-on versions

Hinges

Free swing hinges are used with

TIP-ON for doors with magnet/self

close hinges are used with TIP-ON

for doors with bumper.

Summary of content (4 pages)

PAGE 1
Hinges Mounting Catch plate Hinges The TIP-ON unit can be either The catch plate is the counterpart Free swing hinges are used with bored into the cabinet end panel to TIP-ON. It is available in self- TIP-ON for doors with magnet/self or a attached to the cabinet interior adhesive or screw-on versions. close hinges are used with TIP-ON using adapter plates. for doors with bumper.
PAGE 2
General speciﬁcations Hinges Tool-free door gap adjustment The adjustment feature (+4/-1 mm) has been incorporated into the TIP-ON unit so even when TIP-ON is inserted into the cabinet, it has an integrated gap adjustment. To adjust gap, turn the ejector pin. The click-stop positions allow you to easily ﬁnd the right setting. TIP-ON boring speciﬁcations Standard TIP-ON set Catch plate (screw-on) Catch plate (self-adhesive) 7.5 7.5 50 min. 1 2.5 (3) min.
PAGE 3
TIP-ON for doors Hinges TIP-ON set for standard doors Overlay ▀ ▀ ▀ 50 min Ø 10 ▀ 0.6 ▀ ▀ 18 Nylon gray mechanism with magnet tip Adjustment range +4 mm to -1 mm For use with Blum Euro free swing hinges For door heights less than 48" Works for overlay and inset applications Can be bored into the panel or used with an adapter plate Set includes: ▀ Inset ▀ ▀ 50 min ▀ TIP-ON mechanism Self-adhesive catch plate Screw-on catch plate Wood screw Ø 10 Part no.
PAGE 4
General speciﬁcations Hinges TIP-ON in-line adapter plate for standard doors 14.5 ▀ ▀ ▀ ▀ ▀ In-line adapter plate for standard doors Two-piece, screw-on base plate 20 mm setback, 17 mm apart Door gap factory setting 2 mm Gray nylon 32 20 Application Setback Overlay 20 Inset 22 + door thickness Part no. NOTE: For face frame applications, blocking out may be required Screw-on in-line adapter Installation screw 956.1201 606N or 606P TIP-ON in-line adapter plate for large doors ▀ 14.