Installation Sheet

General specifications

Hinge-to-door attachment

Screw-on

Use #6 wood screws

EXPANDO

Pre-attached Ø8 mm expanding dowels

INSERTA

Tool-free attachment (cup expands into Ø35 mm hole)

Press-in

Pre-attached Ø8 mm dowels installed with Blum knock-in tool or

MINIPRESS with universal insertion ram

Three-dimensional adjustment

Side adjustment

Rotate front screw to increase or decrease

door overlay

+/-

2 mm.

Height adjustment

Rotate cam screw on mounting plate to

adjust door position (

+/-

2 mm). On non-cam

mounting plates, loosen screws, adjust door

and retighten screws.

Depth adjustment

Rotate rear Spiral Tech cam screw to adjust

door position (

3 mm, -2 mm). For CLIP

hinges, loosen rear screws, adjust door and

retighten screws.

Mounting plate-to-cabinet

Screw-on EXPANDO INSERTA