Product Literature

Dimensions in millimeters (inch equivalents as noted) © 2021 Blum, Inc.
33
TANDEM plus BLUMOTION
TANDEM plus BLUMOTION
Locking Devices for 563/569 series
Standard
One right and one left required per drawer
For use with standard applications
Captive right device and self-aligning left device
Self-adjusting drawer length tolerance
Zinc die-cast with synthetic, spring-loaded release levers
Minimum inside drawer width 124 (4-7/8")
Height adjustment
+
3 (1/8")
Part no.
Right locking device
T 5 1 . 1 8 0 1 R
Left locking device
T 5 1 . 1 8 0 1 L
Installation screw
606N or 606P
Vertical mount
One right and one left required per drawer
Vertical mount locking device used to minimize sub-front splitting
Captive right device and self-aligning left device
Self-adjusting drawer length tolerance
Zinc die-cast with synthetic, spring-loaded release levers
Minimum inside drawer width 124 (4-7/8")
Height adjustment
+
3 (1/8")
Minimum sub-front thickness 16 (5/8")
Designed for 13 (1/2") drawer bottom recess
Part no.
Right locking device
T 5 1 . 1 8 0 1 . 2 0 R
Left locking device
T 5 1 . 1 8 0 1 . 2 0 L
Installation screw
606N or 606P
Narrow drawer
One right and one left required per drawer
For use with narrow drawers
Maximum dynamic load capacity 25 lb
Captive right device and self-aligning left device
Self-adjusting drawer length tolerance
Vertical mount, two-piece nylon
Minimum inside drawer width 95 (3-3/4")
Height adjustment
+
3 (1/8")
Minimum sub-front thickness 16 (5/8")
Designed for 13 (1/2") drawer bottom recess
Part no.
Right locking device
T 5 1 . 0 8 0 1 . 2 0 R
Left locking device
T 5 1 . 0 8 0 1 . 2 0 L
Installation screw
606N or 606P
Without Side-to-Side Adjustment