Product Literature

© 2021 Blum, Inc. Subject to technical modifications without notice
22
TANDEM plus BLUMOTION
Inset Drawer
Description Basic Components
Application
▀ Uses the same 563 or 569 series runner
▀ Requires increased setback of the runner
▀ Frame applications require blocking-out
behind the face frame
Specifications
Partial block-out
Side view
NOTE: Only for 563 H and F series runners
Complete block-out
Side view
NOTE: Required for 563. and 569 series runners
Runner setback (see table)
Trial recommended
Blocking behind frame
Inside cabinet depth
Minimum = Runner length + Setback + 6 (1/4")
Inside cabinet depth range
Minimum = Runner length + Setback + 6 (1/4")
Maximum with bracket =
Runner length + Setback + 48 (1-7/8")
Runner setback (see table)
Trial recommended
Blocking behind frame
Drawer length
Rear bracket
(face frame only)
Runner
Locking device
Setback information
Side view
NOTE: For mounting hole position add 7 (9/32") to runner setback
NOTE: Runner cannot be
mounted below opening
Runner setback
Mounting hole position
Drawer sub-front
Drawer front