Product Literature

Dimensions in millimeters (inch equivalents as noted) © 2021 Blum, Inc.
21
TANDEM plus BLUMOTION
TANDEM plus BLUMOTION
Maximum drawer thickness 19 (3/4")
Lengths available 18" - 30"
Static load capacity 150 lb
Drawer and Cabinet Specifications
TANDEM plus
BLUMOTION
Drawer
length
Minimum inside
cabinet depth
Runner
length
Screw locations for frameless cabinets
A B
569A7620B
762 (30") 786 (30-15/16") 777 (30-19/32") 261 (10-9/32") 389 (15-5/16")
569A6860B
686 (27") 709 (27-29/32") 700 (27-9/16") 261 (10-9/32") 389 (15-5/16")
569A6100B
610 (24") 634 (24-31/32") 625 (24-19/32") 261 (10-9/32") 389 (15-5/16")
569F5330B
533 (21") 557 (21-15/16") 548 (21-9/16") 261 (10-9/32") 517 (20-11/32")
569F4570B
457 (18") 480 (18-29/32") 471 (18-17/32") 261 (10-9/32") 453 (17-27/32")
Runner comparison
Side view
569F
569A
Drawer back preparation
Rear view
7 (9/32")
11 (7/16")
Ø6 x 10
Bore for hook
35 (1-3/8") Minimum rear notch
13 (1/2")
Runner mounting specifications
Side view
Runner close-up
NOTE: Elongated holes are for ±4.5 (3/16")
depth adjustment only. Additional screws
must be used to secure the runner to the
cabinet.
NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings
25 (31/32")
37 (1-15/32")
32 (1-1/4")
34 (1-11/32")
7 (9/32")
9 (11/32") Typical
20.5 (13/16")
10 (13/32")
37 (1-15/32")
3 (1/8") Setback
Runner length
A
B
Inside cabinet depth
Blocking for
frame applications
32 (1-1/4")
Drawer box specifications
Front view
NOTE: Drawer side material thickness may vary. Accurate measurement of drawer side
material thickness should be used when calculating outside drawer width using the table
below. Inside drawer width must equal opening width minus 49 (1-15/16") for TANDEM to
align and function optimally.
Calculating outside drawer width
For drawer side thickness
19 (3/4") 18 (23/32") 17 (21/32") 16 (5/8") 15 (19/32")
Deduct from opening width
11 (7/16") 13 (1/2") 15 (19/32") 17 (21/32") 19 (3/4")
Example: For 21" opening width and a 3/4" thick drawer, 21" minus 7/16" = 20-9/16" drawer width
Drawer side thickness
maximum 19 (3/4")
13 (1/2")
Bottom recess
14 (9/16")
Bottom clearance
37
(1-15/32")
Maximum
drawer height =
opening minus
21 (13/16")
Opening width
Opening height
24.5 (31/32")
Outside drawer width
7 (9/32")
Minimum top
clearance
Opening width minus 49 (1-15/16")
606N or 606P
Screws
662.1150.HG
or