Product Literature

Dimensions in millimeters (inch equivalents as noted) © 2021 Blum, Inc.
15
TANDEM plus BLUMOTION
TANDEM plus BLUMOTION
Maximum drawer thickness 16 (5/8")
Lengths available 9" - 21"
Static load capacity 100 lb
Drawer and Cabinet Specifications
Rear mounting bracket
Front view
NOTE: For frame applications, use a
minimum of three screws per bracket
12
Face frame rail
Face frame stile
16 32
14 (9/16")
(1-1/4")
(5/8")
(1/8")
3
21
(13/16")
(15/32")
Runner mounting specifications
Side view Runner close-up
NOTE: Elongated holes are for ±4.5 (3/16")
depth adjustment only. Additional screws
must be used to secure the runner to the
cabinet.
NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings
TANDEM plus
BLUMOTION
Drawer
length
Inside cabinet depth with rear attachment
Runner
length
Screw locations for frameless cabinets
Maximum Minimum
A B
563H5330B
533 (21") 599 (23-19/32") 557 (21-15/16") 548 (21-9/16") 261 (10-9/32") 517 (20-11/32")
563H4570B
457 (18") 522 (20-9/16") 480 (18-29/32") 471 (18-17/32") 261 (10-9/32") 453 (17-27/32")
563H3810B
381 (15") 446 (17-9/16") 404 (15-29/32") 395 (15-9/16") 165 (6-1/2") 357 (14-1/16")
563H3050B
305 (12") 370 (14-9/16") 328 (12-29/32")
319 (12-9/16")
165 (6-1/2") 261 (10-9/32")
563H2290B10
229 (9") 299 (11-25/32") 266 (10-15/32") 259 (10-3/16") 133 (5-1/4") 229 (9")
25 (31/32")
37 (1-15/32")
32 (1-1/4")
34 (1-11/32")
7 (9/32")
9 (11/32") Typical
20.5 (13/16")
10 (13/32")
37 (1-15/32")
A
B
9 (11/32")
3 (1/8") Setback
Inside cabinet depth
295.3750.03
Rear
mounting
bracket
606N or 606P
Runner length
32 (1-1/4")
Fr
ameless and
face frame
Face frame
only
Drawer back preparation
Rear view
7 (9/32")
11 (7/16")
Ø6 x 10
Bore for hook
35 (1-3/8") Minimum rear notch
13 (1/2")
Drawer box specifications
Front view
NOTE: Drawer side material thickness may vary. Accurate measurement of drawer side
material thickness should be used when calculating outside drawer width using the table
below. Inside drawer width must equal opening width minus 42 (1-21/32") for TANDEM to
align and function optimally.
Calculating outside drawer width
For drawer side thickness
16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32")
Deduct from opening width
10 (13/32") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32")
Example: For 21" opening width and a 5/8" thick drawer, 21" minus 13/32" = 20-19/32" drawer width
Drawer side thickness
maximum 16 (5/8")
13 (1/2")
Bottom recess
14 (9/16")
Bottom clearance
37
(1-15/32")
Maximum
drawer height =
opening minus
21 (13/16")
Opening width
Opening height
Opening width minus 42 (1-21/32")
21 (13/16")
Outside drawer width
7 (9/32")
Minimum top
clearance
606N or 606P
Screws
662.1150.HG
or