Product Literature

Locking devices
Locking devices allow easy insertion and
removal of drawers
page 32
Rear mounting options
For use when installing TANDEM runners
in face frame cabinets. Not necessary for
frameless cabinet installation.
page 34
Accessories
page 38
© 2021 Blum, Inc. Subject to technical modifications without notice
8
TANDEM plus BLUMOTION
Drawer components
NOTE: For 563. and 569 series, rear brackets and sockets cannot be used. Cabinet sides
must be blocked-out flush with the inside of the face frame.
NOTE: Rear mounting brackets used for face frame applications only
General Specifications
Complete Runner System
▀ Full extension concealed runners with
BLUMOTION soft close
▀ Zinc-coated steel
▀ Concealed roller carriage with permanently
lubricated synthetic rollers
▀ Available in standard and heavy duty
▀ H and . series for drawers up to 5/8" side
material thickness
▀ F and A series for drawers up to 3/4" side
material thickness
▀ Elongated holes for depth adjustment
▀ Bottom mount holes on 15", 18" and 21"
standard duty
▀ Tool-free tilt adjustment
▀ Tool-free rear side-to-side adjustment
Locking Devices
▀ Stamped steel or zinc die-cast base with
synthetic, spring-loaded release levers
▀ Captive right device, self-aligning left device
▀ Self-adjusting drawer length tolerance
▀ Tool-free height adjustment
▀ Tool-free front side-to-side adjustment
▀ Available with depth adjustment
▀ Available for narrow drawers
Rear Mounting Options
▀ Zinc-coated steel brackets or nylon sockets
▀ Depth and lateral self-alignment
One Runner for All Applications
TANDEM runners are designed for the
American 3" increment cabinet depth
system. This feature permits overlay or inset
applications to use the same runner. Full
length runners make installation in frameless
or face frame cabinets possible.
Load Capacities
▀ 100 lb static, 90 lb dynamic for TANDEM
plus BLUMOTION 563 series
▀ 150 lb static, 135 lb dynamic for TANDEM
plus BLUMOTION 569 series
Rear mounting brackets
(face frame 563 H/F only)
Locking devices
Runners
Concealed Runner Template
A required assembly aid for the pre-boring
of TANDEM locking device screw holes
and rear hook holes
page 40