Specification Sheet

ManualsBrandsBlum ManualsHingesBlum COMPACT Full Overlay Press-In Concealed European Cabinet Door Hinge with 110 Degree Opening Angle and BLUMOTION Function - Single Hinge

Adjustment

Deactivation switch

Dimensions

Accessories

Type 17 truss head screw

834TH

Angle restriction clip

38C315B3

Hinge cup spacer

38C355B9

Cover cap

38C3508

Boring pattern

9.5

3/4"

3/8"

pilot hole

1/8"

Ø8

Ø35

20.5

Door Cabinet

COMPACT BLUMOTION 39C hinges for full overlay

Wraparound hinges

Overlay Screw-on Press-in

39C355B.16 39C358B.16

1-1/4"

39C355B.20 39C358B.20

1-5/16"

39C355B.21 39C358B.21

1-3/8"

39C355B.22 39C358B.22

1-9/16"

39C355B.25 39C358B.25

Features

3/4" door = 7/32"

based on square

edge doors

Features

Minimum reveal

■ BLUMOTION soft close integrated

into the hinge cup

■ Deactivation switch for small/light doors

■ Overload safety feature

■ One-piece wraparound hinge

■ 1/2" cup depth

■ Press-in hinges must be inserted with

knock-in tool or universal insertion ram

sq. edge

minimum reveal

1/8"

5/16"

3/4"

overlay

gap

3/16" factory setting,

adjus

3/32" -1/32"

110°

1-1/16"

1/2"

110˚

Cam depth

adjustment

Height

adjustment

Cam side

adjustment

Summary of content (3 pages)

PAGE 1
COMPACT BLUMOTION 39C hinges for full overlay 110˚ Minimum reveal Features ■ BLUMOTION soft close integrated into the hinge cup ■ Deactivation switch for small/light doors ■ Overload safety feature ■ One-piece wraparound hinge ■ 1/2" cup depth ■ Press-in hinges must be inserted with knock-in tool or universal insertion ram sq.
PAGE 2
General specifications BLUMOTION inside Hinge attachment Screw-on Press-in Use #6 wood screws Pre-attached Ø8 dowels installed with Blum knock-in tool or MINIPRESS with universal insertion ram Mounting plate attachment 39C/38C series ‒ wraparound 38N series ‒ wraparound Hinge cup centerpoint 38B series ‒ face mount Minimum reveal Hinge cup centerpoint and MINIPRESS/MINIDRILL setback position is 20.5 (13/16") for COMPACT BLUMOTION hinges.
PAGE 3
Adjustment BLUMOTION inside Door adjustment Three-dimensional adjustment Side adjustment Height adjustment Depth adjustment Rotate the front cam screw to increase or decrease door overlay (+/- 1/16"). Loosen installation screws to adjust door position (+/- 1/8"), then retighten. Rotate the rear cam screw to adjust door gap (+ 3/32", - 1/32").