Angle Restriction Clip Guide

Assembly instructions
Step 1 — Remove door
Loosen and remove installation screws.
Step 2 — Rotate hinge arm
Rotate hinge arm to closed position.
Step 3 — Insert angle restriction clip
Insert angle restriction clip (38C315B3.1) into
base of hinge arm.
Step 4 — Rotate hinge arm
Rotate hinge arm to open position to secure.
Step 5 — Reattach door
Align door and reattach by inserting and tightening
installation screws.
NOTE: Restriction clip limits door opening angle to 86°
COMPACT BLUMOTION — Angle restriction clip
Subject to technical modifications without notice. © 2013
LIT.HNG5500.02.13
“click”
“click”