Brochure

Dimensions in millimeters (inch equivalents as noted) © 2015 Blum, Inc.
90
Hinges
Spindle head retrofit set
▀ Required for attachment of 9 and 8 spindle heads to MINIPRESS/
MINIDRILL produced in 2009 and prior
▀ Previous boring heads MZK.1000.US and MZK.8000.US cannot be
used with the retrofit set
Set includes:
Part no.
Spindle head retrofit set
M30.1313.UM
8 spindle head
▀ 8 spindle head for use with MINIPRESS/MINIDRILL
▀ Bores eight holes spaced 32 mm apart, perpendicular to the fence
▀ New feature – quick-disconnect chucks
▀ Once aligned, does not require additional adjustment
▀ Bores all METABOX and TANDEMBOX front fixing brackets/galleries
▀ Bores cabinet side panels for all Blum runner systems
▀ Requires retrofit set for use with machines produced in 2009 or prior
Includes:
▀ Ø3 mm allen wrench
▀ Distance spacer
▀ Drive pin
▀ Air hose
Part no.
8 spindle head
MZK.880S
NOTE:
Requires 4 each left hand and 4 each right hand drill bits
Chuck cover cap
M30.1329
9 spindle head
▀ 9 spindle head for use with MINIPRESS/MINIDRILL
▀ Bores nine holes spaced 32 mm apart, parallel to the fence
▀ New feature – quick-disconnect chucks
▀ Once aligned, does not require additional adjustment
▀ Bores cabinet side panel for 32 mm system boring for Blum
mounting plates and runners
▀ Requires retrofit set for use with machines produced in 2009 or prior
Includes:
▀ Ø3 mm allen wrench
▀ Distance spacer
▀ Drive pin
▀ Air hose
Part no.
9 spindle head
MZK.190S
NOTE:
Requires 5 each left hand and 4 each right hand drill bits
Chuck cover cap
M30.1329
Machine accessories
1
2
3
4
6
5
Machines
& accessories
1
Adapter ring and shield
2
Ø5 mm allen wrench
3
Mounting bolts (qty 4)
4
Alignment pins (qty 2)
5
Alignment template
6
13 mm fixed depth stop (qty 2)