Brochure

© 2015 Blum, Inc. Subject to technical modifications without notice
27
Hinges
Maximum door overlay
Trial application recommended
Maximum door thickness
Trial application recommended
NOTE:
For thick door applications, you must bore at the specified
boring distance listed in the chart below
Mitered door with large overlay
Trial application recommended
Thin facing added to door
Trial application recommended
HOverlay
01922242628303234
811131517192123
B = boring distance
Minimum reveal T = door thickness
228272625
34567
8
B = boring distance
*Minimum reveal is 1 mm on a 25 mm thick door when bored at 8 mm
NOTE: These applications can be achieved in face frame cabinets by blocking out behind the frame
Straight-arm Self close
Screw-on
▀ 71T7500N
Press-in
▀ 71T7530N
INSERTA
▀ 71T7540N01
54.6
1.5
19
19
B = 25.1
110
°
37
H = 0
1
19
11.7
2.9
B
1.5
11.7
110
°
37
reveal
T
H = 0
1.5
11
110
°
37
19
34 max
H = 0
11.7
B = 23 max
16
16
4
20
B = 5
37
1.5
31 max
110
°
H = 0
11.7
CLIP top 155°
straight-arm special applications
Angle restriction clips
▀ For use with 155°/125° zero
protrusion hinges
▀ Gray nylon
Part no.
110° restriction clip
70T7503N
92° restriction clip
70T7503N09
70T7503N70T7503N
70T7503N
70T7503N
Abbreviations
H
=Plate height
P = Door protrusion
S = Side arm protrusion
W = Side panel width