Brochure

Dimensions in millimeters (inch equivalents as noted) © 2015 Blum, Inc.
8
Hinges
Three-dimensional adjustment
Side adjustment
Rotate front screw to increase or decrease
door overlay (±2 mm)
Height adjustment
Rotate cam screw on mounting plate to
adjust door position (±2 mm). On non-cam
mounting plates, loosen screws, adjust
door and retighten screws.
NOTE: On non-cam mounting plates,
loosen screws, adjust door and retighten
screws
Depth adjustment
Rotate rear spiral tech cam screw to adjust
door gap (+3 mm, -2 mm)
BLUMOTION deactivation
Deactivation switch on hinge cup
For small or light doors, the BLUMOTION can be deactivated on one
of the hinges
Door must be closed once for the deactivation to be complete.
To reactivate, move switch back to original position.
1
2
Temperature information
CLIP top BLUMOTION is designed to be used at temperatures between 65° and 85°F. Lower or higher temperatures will not cause damage
to the hinge, however they will affect the closing speed. Once the temperature returns to the suggested range the hinge will return to its optimal
closing action.
Adjustments