Owner's Manual

Dimensions in millimeters (inch equivalents as noted) © 2022 Blum, Inc.
7
Hinges
Hinge cup centerpoint
Hinge cup centerpoint
and MINIPRESS
setback position is
20.5 (13/16") for
COMPACT CLIP
hinges.
NOTE: Maximum door thickness 3/4
"
Mounting plate attachment
30C series ‒ wraparound/edge mount 31C series ‒ wraparound
Press-in
Pre-attached Ø8 dowels installed with Blum press-in tool or
MINIPRESS with COMPACT insertion ram.
Screw-on
Use #6 wood screws.
Minimum reveal
A minimum reveal per door is
required to keep the door from
binding and varies depending on
door thickness.
See minimum reveal table for
each hinge.
rev
eal
Hinges per door
This chart can serve as a guide for determining the number of hinges
per door. Note that door weight can also determine the number of
hinges required.
NOTE: The distance between the top and bottom hinges must be greater than the width of the door
hinges required per door
2 3 4 5
cabinet height
100"
80"
60"
40"
20"
<
15 lb
15-30
lb
30-45
lb
45-60
lb
Ø8
45
9.5
Ø35
3 (1/8")
3/4"
door
20.5 (13/16")
11-13
General Specifications
47