Specification Sheet

7
Drawer and cabinet specifications
Cabinet Depth
Min. Top Clearance
Interior Depth
Cabinet Profile
Mounting Screw s
612TH
(#6 x 1/2" T russ Head)
Bottom Clearance
4 (3/16")
Opening minus
20(13/16")
Max. Drawer Height
*
32 (1-1/4")
Setback
2 (1/16")
Socket Range
25 to 62
(1" to 2-7/16")
602300 R H
602301 LH
Rear Mount Sockets
16(5/8")
Mounting
Position
13.5 (1/2")
*
Drawer Length
Extension Loss
Opening
Side
Clearance
12.5 (1/2")
Max. Drawer Height
Opening minus
C aptive
Profile
32
(1-1/4")
18.5
(3/4" )
15
(9/16") Min. T op Clearance
Drawer Width = Interior Cabinet Width - 25 (1")
Interior Cabinet Width
4 (3/16")
Bottom Clearance
To lerance
Profile
*
*
Cabinet Profile Screw s
606 N (#6 x 5/8") or
System screw s
Drawer Profile Screws
606N (#6 x 5/8") min.
3 per profile
19 (3/4")
* Minimum top clearance and maximum drawer height when drawer
is of recommended length and tilting to remove is not desired.
Cabinet Depth
Interior Depth
18 (3/4")
Setback
2 (1/16")
Install screw in flange
*
32mm Increment
Mounting Position
37 (1-7/16")
Install at least one
center screw
*
*
To achieve maximum weight capacity
Drawer length
Width
Fr
ont
Position profiles
flush with front
of drawer box
Attach through
sides or bottom
* Minimum top clearance and maximum drawer height when drawer
is of recommended length and tilting to remove is not desired.
Frame cabinet installation Panel cabinet installation
Drawer profile mounting
Rear mount socket location
9
(1 1/32")
32
(1-1/4")
50
(2")
Dotted
line
shows
front
frame
34.5
(1-3/8")
21
(7/8")
Mounting Screws
612TH (#6 x 1/2" Truss head)
Min. (3) recommended
Subject to technical modifications without notice. © 2012
Dimensions in millimeters (inch equivalents as noted)