Product Literature

Installation of Blum distance bumpers

For AVENTOS HF – install into door front. Use

of six distance bumpers is recommended.

For AVENTOS HS/HL ‒ install into door front.

Use of four distance bumpers is recommended.

Drive unit preparation

Before SERVO-DRIVE for AVENTOS installation, the lift mechanism

tension adjustment should be made and door operation balanced.

The AVENTOS arm assembly must be in the completely open position

for drive unit installation. Attach the opening angle stop (if required)

only after drive unit installation and before the reference run.

Use the lift mechanism selection switch to select the appropriate

lift system application.

Installation of universal cable

Lift orange universal cable lock lever Insert universal cable (either end of the

cable can be used)

Once cable is inserted, press down on

universal cable lock lever

1 3

1 2 3

Installation of SERVO-DRIVE activation switch

NOTE: Use of boring template (M31.2000) recommended, see page 99

The activation switch should be installed by pressing into the cabinet

side with your hand. Do not use hammer to install.

30 min.

90 max.

Ø35

Assembly for

AVENTOS HF/HS/HL

SERVO-DRIVE for

AVENTOS

NOTE: The distance bumper should not touch

the SERVO-DRIVE switch