Manualshelf

Installation Guide

ManualsBrandsBlum ManualsView All BlumBlum AVENTOS HS Up-And-Over Lift Mechanism For Cabinet Doors Up To 31 Inches High with Max Weight of 47.3 Pounds
12345678
Subject to technical modifications without notice. © 2015
3
4
Attaching the stabilizer rod
3
Attaching the arm assembly
Before starting, see safety note on page 2
1. Find the right and left arm assemblies and match
them to the correct side of the cabinet.
2. Attach the arm assembly to the lift mechanism
as shown.
3. Lift up on the arm assembly to lock into place.
21
2
1
3
Cut the stabilizer rod to fit the cabinet. Length = Interior cabinet opening minus 129 (5-1/6")
After cutting the rod to size follow steps 1, 2, and 3 below.
Risk of injury from spring loaded arm.
1
2
3
Slide the stabilizer arm cover caps onto the rod
Attach the stabilizer rod to spring loaded arm assembly
Slide stabilizer arm cover caps over rod on each end
2 31
a b