Narrow Aluminum Door Installation Guide

Subject to technical modifications without notice. © 2015
5
9
Attach covers
8
Adjusting the door
7
Adjusting the lift mechanism tension
Use a screw gun and the supplied #2 x 2 POZI driver bit to adjust the lift mechanism
to the desired tension.
Use a POZI screwdriver to adjust cam
adjustments for each of the
three-dimensional adjustments.
Snap the symmetrical cover caps on
each cover plate. Place the left and
right cover plates over the appropriate
lift mechanisms and snap them in
place.
mm
mm
mm
1 2 3
3 2 1