Installation Guide
Subject to technical modifications without notice. © 2015
5
9
Attach covers
7
Adjusting the lift mechanism tension
Use a screw gun and the supplied #2 x 2 POZI driver bit to adjust the lift mechanism
to the desired tension.
Use a POZI screwdriver to adjust
cam adjustments for each of the
three-dimensional adjustments.
Snap the symmetrical cover caps on
each cover plate. Place the left and
right cover plates over the appropriate
lift mechanisms and snap them in place.
8
Adjusting the door
mm
mm
mm
1 2 3
3 2 1








