Installation Sheet
6
Subject to technical modifications
without notice. © 2010
Removal
Remove the cover caps and cover plate.
2
Remove the covers
Risk of injury from spring-loaded arm
 Do not push arm assembly down or leave in the down position
 Remove mechanism before installing or removing cabinet
WARNING
3
Remove the stabilizer rod
Pull back the stabilizer rod cover caps and loosen the locking screws on each end of the stabilizer 
rod. Remove the stabilizer rod from the cabinet.
1
2
3
1
Removing the door
Open  the  door.  Support  the  door  with  one  hand  and  push  down  tab  to  disengage  the  CLIP 
mechanisms of the arm assemblies of the mounting plates.
1
2
Lift the door off the mounting plates.








