Installation Sheet

2
Subject to technical modifications
without notice. © 2010
Risk of injury from spring-loaded arm
Do not push arm assembly down or leave in the down position
Remove mechanism before installing or removing cabinet
Assembly
AVENTOS boring template is available for pre-boring 5 mm locating pins
WARNING
█
Use the AVENTOS template to pre-bore the
locating pin holes for the AVENTOS HK
lift mechanism
█
After aligning the lift mechanism with the
cabinet using the locator pins, attach the
mechanism with the three mounting
screws provided
1
Locating pin locations and minimum depth
Part no.
65.5020
2
Attaching the lift mechanism
77
128
261
5
37
68.5
128
Z
261
5
Panel Face frame
Overlay up to 28
32 35
Z
37 35 33
NOTE: Face frame cabinets must be blocked out
flush with the frame.
#7 x 35 mm (1-3/8") wood screws (qty 3)