Product Literature

Inset Applications

AVENTOS

Planning information for blocking-out

In this illustration the 37 setback for the

Ø5 x 5 locating pin holes is measured

from the back of the door (or back edge

of face frame). The Y dimension is the

locating pin position of the selected lift

mechanism.

NOTE: Mounting plate position varies

based on block-out thickness used at

top of cabinet

This illustration shows how the block-out provides the needed clearance for the lift mech-

anism and also provides a stopping point for the door.

BT = block-out thickness

Face Frame Application

The illustrations below show the idea of blocking-out the interior of a face frame cabinet to obtain the needed space required for

AVENTOS. By blocking-out the interior of the cabinet to protrude into the cabinet opening, we have moved the AVENTOS lift

mechanism far enough into the opening for the arm assembly to clear the frame of the cabinet.

Face frame inset application

When it comes to inset cabinets and AVENTOS, there are

many ways to accomplish this application. Below is an option

that can be used for both face frame and frameless cabinets

alike.