Product Literature

AVENTOS HK-S Assembly

AVENTOS

Attaching AVENTOS HK-S doors

Attach the door using the CLIP mechanism to the arm assembly.

Adjust the lift mechanism

Use a screw gun and a #2 x 2 POZI driver bit to adjust the lift mechanism to the desired tension (door weight balanced).

Warning: Risk of injury by spring-loaded lever arm!

Remove transport tab

Carefully remove the transport tab.

Slowly raise the arm to the upright position.

1 2

NOTE: Do not remove transport tab until just before attaching the door

▬ Do not push telescopic arm down

▬ Remove telescopic arm from mechanism before installing cabinet