Product Literature

AVENTOS HK-S Planning Specifications
for Frameless and Face Frame
AVENTOS
Lift mechanism positioning
Two locating pins fit into Ø5 x 5
holes bored in the side of cabinet for
proper positioning.
The included #7 x 35 (1-3/8") wood screws
are required in the three holes marked in
orange.
Lift mechanism clearance
5 min.
Ø5
Door and hardware clearance
Z
=
door height x .29 minus 15 + door thickness
Bore for the locating pins
NOTE: Locating pin holes shown in orange
Door and hardware clearance
Z
=
door height x .29 minus 15 + door thickness
Bore for the locating pins
NOTE: Locating pin holes shown in orange
overlay up to 20
24 26
Z3735.534.5
Frameless Application
Face Frame Application
See page 75 for
optional face frame
mounting bracket or
block-out side flush
with frame.
29
64
52
Z
Ø5
64
52
37
Ø5
186 (7-3/8") to 610 (24")
144 min.
165 min.
Z
150 min.
572 max.
door height + 1.5
186 (7-3/8") to 610 (24")
144 min.
165 min.
Z
150 min.
572 max.
door height + 1.5
Refer to page 74 for angle restriction clip options
© 2021 Blum, Inc. Subject to technical modifications without notice
48