Product Literature

AVENTOS HF door adjustments
Adjust each top door hinge and mounting plate to properly
align the top door to the cabinet.
Adjust each bottom door hinge and mounting plate to properly
align doors to the cabinet and to the top door.
± 2± 2.5
± 2
± 2± 3
+ 3 / - 2
NOTE: Although not illustrated here, telescopic arm mounting plates can also be adjusted horizontally ± 2 if needed
1
2
Lift mechanism tension adjustment
Close and flush doors to cabinet. Open and
close door to test closing force.
Use a screw gun and a #2x2 POZI driver
bit to adjust the lift mechanism to the
desired tension. Test door again and repeat
until desired function is achieved. Tension
adjustment should be the same on both lift
mechanisms.
1
2
1 2
Adjust and lock telescopic arms
Close and flush doors to cabinet. While pressing on the top door, pull the bottom door open
approximately one inch.
Slightly open door and lock the telescopic arms into position using the levers as shown.
Attaching cover caps
Place the left and right cover plates over the
appropriate lift mechanisms and snap them
in place.
2
Open door
enough to
lock levers
AVENTOS HF Adjustments
AVENTOS
1
Dimensions in millimeters (inch equivalents as noted) © 2021 Blum, Inc.
19