Technical data

16
17
AMP1
™
+ REMOTE1
™
+ LOOPERKIT
™
=
A fully programmable professional guitar system
DIRECT ACCESS - MODE
This REMOTE1
™
mode enables the following convenient footswitch options:
CLEAN, VINTAGE, CLASSIC, MODERN, BOOST, REVERB, FX-LOOP, as well as MasterVolume
and PowerSoak.
•MasterVolume expands your AMP1
™
’s functionality by adding a controllable and
footswitch-selectable second Master Volume.
•PowerSoak expands your AMP1
™
’s functionality by adding a controllable and
footswitch-selectable reduction in power.
•LEVEL controls the level of the previously selected function.
PRESET - MODE
In Direct Access Mode, every footswitch setting can be saved on one of the 36 Presets (which come in four
banks of 9). Like this, you can save the same sound with different volumes and effects as rhythm and solo
tones, for example. The Gain level is also controllable for each Preset, which opens up a lot of new sound
nuances. With each Preset, a MIDI program change command is sent via the MIDI-OUT connector to switch
external MIDI-enabled effects equipment. This way, you can control all of AMP1
™
’s functions with a simple
stomp of your foot, and switch a MIDI FX unit to your chosen Preset at the same time.
LOOPERKIT
For players who want to integrate their favourite FX pedals into the AMP1
™
guitar system, the optional
Looper Kit extension, which features four true bypass relay loops, is available. The switching status of the
Loops is saved together with the Presets. With just one stomp of the foot, REMOTE1
™
controls AMP1
™
’s sound, the FX pedal in the FX Loop, and the four Loops simultaneously. This makes tap dancing on the
pedalboard a thing of the past! Thanks to the four True Bypass Loops, the signal only passes through the
FX units that are active within the specified Preset. This guarantees the shortest signal path, with as little
sound loss as possible.
The pedalboard of the future!
16 17
Speaker Out
REMOTE1
™
1 2 3 4FX-Loop
Looper Kit
17
With AMP1
™
it’s possible to build a complete, programmable guitar amp and effects setup on your pedal-
board for the first time ever. This doesn’t just save on weight and extra equipment, but also significantly
reduces the amount of cabling, which not only benefits your tone, but saves you an awful lot of time with
assembly and clear-up before and after the gig!