Technical data

52
53
•Thedevicemayonlybeusedwithstands,tripods,tablesorbrackets
specified by the manufacturer or sold with the product.
•Useonlyaccessoriesrecommendedbythemanufacturer.Thisappliestoall
kinds of accessories, for example protective covers, transport bags, stands,
wall or ceiling mounting equipment. When attaching any kind of
accessories to the product, always follow the instructions provided by the
manufacturer. Only use the fixing points on the product as specified by the
manufacturer.
•ThedeviceisNOTsuitabletobeusedbyanypersonorindividuals 
(including children) with reduced physical, sensory or mental ability, or by
individuals with insufficient experience and/or knowledge to operate such
an appliance. Children under four years of age must be kept away from
the device at all times.
•Neverpushobjectsofanykindintothedevicethroughhousingslotsas
they might touch dangerous voltage points or cause short outs. This could
result in the risk of fire or electric shock.
•Thedeviceiscapableofproducingsoundpressurelevelsinexcessof 
90dB. This could lead to permanent hearing damage! Exposure to
extremely high noise levels may cause permanent hearing loss. If
continuously exposed to such high volume levels, hearing protection
should be worn.
•Themanufactureronlyguaranteesthesafety,reliabilityandperformance
of this device under the following conditions:
- Installation, extension, re-adjustment, modifications or repairs are
carried out by the manufacturer or by authorised personnel.
- The electrical installation of the relevant part complies with the
requirements of IEC (ANSI) specifications.
- The device is used in accordance with the operating instructions.
- The electrical safety of the device is regularly checked and tested by a
qualified technician.
Safety Instructions
Technical Data:
Input: unbalanced jack
Sensitivity: OV-15V P2P maximum
Input impedance: 2 M Ω
Power output: about 100 watts
Speaker connections
Input jacks: 1 x 8 Ω, 1 x 16 Ω
FX Send/Return: unbalanced jack
FX Send-Output and FX-Return Input levels dependent on switching
LOW: -10dBU +/-1dB or 0.7V P2P
HI: +4dBU +/-1dB or 3.46V P2P
FX Send-Output impedance: < 1.3kΩ
FX Return-Input impedance: > 18kΩ
Mains voltage range: 100-240V +/- 10 % 50-60 Hz
Power consumption: max. 150 watts
Fuses: internal: 3.15 SB
Ambient operating temperature range:
0 °C to + 35 °C
Logic MIDI control system:
STM 8 S
System interfaces:
Upgradeable with external programming device
BluGuitar
®
specific, anachronous data protocol.
Dimensions:
Width: 245 mm
Height: 68 mm
Depth: 192 mm
Weight: 1.2 kg
We reserve the right to perform technical modifications without prior notice.
© Copyright 2014 BluGuitar GmbH.
Reproduction of this manual is expressly prohibited. All rights reserved.
BluGuitar GmbH
Universität des Saarlandes
Campus Starterzentrum, Geb. A1 1
D-66123 Saarbrücken
Phone: [phone]
E-Mail: [e-mail]
www.bluguitar.com
Technical Data