SDS

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
BLUFIXX PW
Material number BF-405-04
Revision date: 6/26/2017
Version: 4
Language: en-US
Date of print: 7/4/2017
Page: 4 of 8
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
May form dangerous gases and vapours in case of fire. Furthermore, there may
develop: Carbon monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:
Keep public away from danger area. Do not breathe fumes. Cool exposed containers
with water spray. Fire residuals and contaminated extinguishing water must be disposed
of in accordance with the regulations of the local authorities.
6. Accidental release measures
6. Accidental release measures
Personal precautions:
Wear appropriate protective equipment. Do not breathe vapor. Take off contaminated
clothing and wash it before reuse.
Provide adequate ventilation. Avoid contact with skin and eyes. Keep unprotected people
away. Eliminate all ignition sources if safe to do so.
Environmental precautions:
Avoid release to the environment. Inform the relevant authorities in case of leakage into
sewers, aquatic environment or soil.
Methods for clean-up:
For containment: Absorb with liquid-binding material (e.g. sand, diatomaceous earth,
acid- or universal binding agents) and place in closed containers for disposal.
Methods for cleaning up: Take up mechanically, placing in appropriate containers for
disposal. Final cleaning.
7. Handling and storage
7. Handling and storage
Handling
Advices on safe handling:
Avoid contact with skin, eyes and clothes. Do not breathe vapor.
Wear appropriate protective equipment. When using do not eat or drink.
Provide adequate ventilation, and local exhaust as needed. Wash hands before breaks
and after work.
Take off contaminated clothing and wash it before reuse. Have eye wash bottle or eye
rinse ready at work place.
Precautions against fire and explosion:
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
Storage
Requirements for storerooms and containers:
Store container tightly closed in a dry and cool place.
Protect from heat and direct sunlight.
Hints on joint storage:
Keep away from food, drink and animal feedingstuffs.
Do not store together with: Free radical polymerization initiator, strong alkalis, reactive
metals and bases.
8. Exposure controls / personal protection
8. Exposure controls / personal protection
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
See also information in chapter 7, section storage.
printed by Blufixx USA with Qualisys SUMDAT