Users Manual

26 27
Transferring videos and images
Transferring video and images from the drone can either be done in the app or
on a PC.
To transfer videos and images to a mobile device, turn on the drone and
surface unit, connect the mobile device to the surface unit Wi-Fi, start the app,
and choose “Transfer video files”.
To transfer videos and images to a PC go to this address: https://www.blueye.
no/Software/FileTransfer
Download and install the Blueye File Transfer Desktop App on the computer.
Turn on the drone and the surface unit and connect the computer to the
surface unit Wi-Fi.
Open the Blueye File Transfer Desktop App and choose which files to download
to the computer.
Turn off the drone when files have been transferred.
24
Transferring videos and images
To transfer videos and images to a mobile device, turn on the drone
and surface unit, connect the mobile device to the surface unit Wi-Fi,
start the app, and choose “Transfer video files”.
Transferring video and images from the drone can either be done in the
app or on a PC.
To transfer videos and images to a PC go to this address: https://www.
blueye.no/Software/FileTransfer
Download and install the Blueye File Transfer Desktop App on the
computer.
Turn on the drone and the surface unit and connect the computer to
the surface unit Wi-Fi.
Open the Blueye File Transfer Desktop App and choose which files to
download to the computer.
Turn off the drone when files have been transferred.
24
Transferring videos and images
To transfer videos and images to a mobile device, turn on the drone
and surface unit, connect the mobile device to the surface unit Wi-Fi,
start the app, and choose “Transfer video files”.
Transferring video and images from the drone can either be done in the
app or on a PC.
To transfer videos and images to a PC go to this address: https://www.
blueye.no/Software/FileTransfer
Download and install the Blueye File Transfer Desktop App on the
computer.
Turn on the drone and the surface unit and connect the computer to
the surface unit Wi-Fi.
Open the Blueye File Transfer Desktop App and choose which files to
download to the computer.
Turn off the drone when files have been transferred.
Charging the batteries
Before charging the drone make sure that the drone
is turned off. Connect the power supply to the
charger and connect the power supply to the wall
socket. Make sure that the charging selector switch
on the bottom is set to drone charging. See page 7.
Place the drone on a robust and stable surface
laying on the left side to remove any risk of the
drone falling over.
Unscrew the charging connector cap on the drone
and connect the charger to the charging port on
the drone with the included charging cable.
Open the connector lid on the Surface Unit and
connect an output of the external USB charger to
the charging port (micro USB) on the Surface Unit.
Make sure the USB output rating is minimum 2.1A.
Connect the other USB outputs on the external
USB charger to charge a mobile device and the
controller.
To disconnect the power supply from the mains,
pull the plug from the wall socket outlet. Make sure
that the wall socket outlet is easily accessible.
Do not turn the drone on while charging, it may dam-
age the drone and/or charger. When finished charging
remember to put the charging connector cap back on.
> 1,5 m/s
150 m