Operating instructions

27
EN
Battery Test Description When UPS is in AC mode or CVCF mode, press “Test” key for more than 0.5s.
Then, the UPS will beep once and start “Battery Test”. The line between I/P
and inverter icons will blink to remind users. This operation is used to check
the battery status.
LCD display
Warning
status
Description If some errors occur in the UPS (but it is still running normally), it will show
one more screen to represent the warning situation. In the warning screen,
the icon
will be flashing, and it can show up to 3 error codes and each
code indicates one error. You can find the code
meaning in the warning
code table.
LCD display