Operating instructions

 09: Battery maximum discharge time setting

Interface

Setting

Parameter 3:

000~999: Set the maximum discharge time from 0min to

999min. UPS will shut down to protect battery after discharge time

arrives. The default value is 990min.

DIS: Disable battery discharge protection and backup time will

depend on battery capacity.

 10: reserved

Interface

Setting

reserved

 11: reserved

Interface

Setting

reserved

 12: reserved

Interface

Setting

reserved

 13: Battery voltage calibration

Interface

Setting

Parameter 2: Select “Add” or “Sub” function to calibrate battery

voltage to real figure.

Parameter 3: the voltage range is from 0V to 5.7V, the default

value is 0V.