EN Automatic Voltage Regulator PowerWalker AVR 500/SIV PowerWalker AVR 1000/SIV PowerWalker AVR 1500/SIV PowerWalker AVR 2000/SIV PowerWalker AVR 3000/SIV Quick Start Guide EN
1. Introduction This AVR/SIV series is designed to automatically maintain a constant voltage level to protect sensitive electronics from brownouts and overvoltages. Equipped with comprehensive information display, it’s easy to monitor the power status.
. Product Overview Front Panel: Power switch Output voltage display/Startup countdown display Input voltage display Handle (Optional for 500VA/1000VA) Startup delay time switch Input voltage range selector Power LED (Green) AVR LED (Yellow) Over-voltage / under-voltage indicator (Red) Back Panel: AVR 500/1000/SIV Output sockets for French /Schuko AC input French AVR 1500/2000/SIV Output sockets for French /Schuko AC input Schuko AVR 3000/SIV Output sockets for French /
4. Installation I: Inspection Remove the AVR from the shipping package and inspect the unit. Be sure that nothing inside the package is damaged. II: Placement Please install the AVR in a protected environment. Do NOT block the top or side air vents on the unit. Please reserve 20cm space to avoid interference. Do NOT operate the AVR where the temperature and humidity is outside the specific limits. (Please check the specs for the limitations.
110-280 V : Setting acceptable input voltage range within 110-280V. 150-270 V : Setting acceptable input voltage range within 150-270V. 6.
EN
