User manual

User Manual Fugoo Bluetooth Speaker model FSNA1 page 9 10/8/2014
Power Save mode On / Off
The speaker can shut itself off to conserve power, after a period of inactivity. Beginning
with firmware version 1.0.43, Power Save mode can be toggled on and off by holding the
– (volume down) button while turning the speaker on with the (Power) button.
If Power Save mode is on, then the speaker will shut itself off as follows…
 If the speaker is not connected to a source device
and is not charging, the speaker turns off after 15 minutes of inactivity.
 If the speaker is not connected to a source device
and is charging, the speaker turns off after 30 minutes of inactivity.
 If the speaker is connected to a source device
and is not charging, the speaker turns off after 1 hour of inactivity.
 If the speaker is connected to a source device
and is charging, the speaker will not shut off automatically.
If Power Save mode is off, then the speaker will remain on until you turn it off by pressing
the (Power) button for one second.
Resetting the speaker
• It the speaker becomes unresponsive, or behaves differently than you believe it
should, try resetting it. Hold the (Bluetooth) and  (Action) buttons for ten
seconds. This will reset the speaker's processor, without clearing its pairing list.
• The speaker can be reset whether it's on or off.
Updating your Fugoo Bluetooth Speaker's firmware
Fugoo posts new versions of the speaker firmware from time to time to add features,
improve the sound quality and loudness, and enhance the user interface.
The firmware updates are installed by an Update Utility that is compatible with Windows
8, Windows 7, Windows Vista, Windows XP, and Mac OSX 10.6 and higher.
Please visit the Downloads page on our website to download the Update Utility and the latest
speaker firmware.
Care and maintenance
Cleaning the core
• After a day at the sandy beach or the muddy trail, remove your speaker core from its
jacket and rinse it off with warm water from a sink faucet. Don't use soap,
detergents, or any chemical cleaning products. Don't use a garden hose,
compressed air, or any other high-pressure stream to clean it, as this may damage
the speaker drivers. Don't use a brush of any kind, for the same reason.
Cleaning the Style and Sport jackets
• Remove your sandy or muddy Style or Sport jacket from the speaker core, and rinse it
off with warm water from a sink faucet. Don't use a garden hose or any other high-
pressure stream to clean it, as this may damage the jacket's fabric covering. Feel free to
use soap or detergent, but don't use a brush of any kind, for the same reason.