User manual

User Manual Fugoo Bluetooth Speaker model FSNA1 page 8 10/8/2014
Taking a call
If you take a call on your phone when it is connected to the speaker, you'll hear it ringing
through the speaker.
• Click the  (Action) button to receive (pick up) the call.
• Talk and listen through the speaker during the call.
• Click + or – to raise or lower the volume.
• Click + and – to mute the microphone.
• Click  to end (hang up) the call.
• If you have a call on hold, press  to switch to it, and to switch back to the other call.
• Double-click  to end the active call and switch to the call on hold.
• Use your phone’s controls if you would like to transfer the call back to your phone.
Voice Response mode
• While your phone or other device is paired to the speaker (and a call is not in
progress) hold  (Action) for one second. A tone sounds through the speaker to
activate a voice response service, such as Siri or Google Now.
• Speak voice response commands through the speaker’s microphone.
• Click + or – to raise or lower the volume.
• Click the  (Action) button) to cancel voice response mode.
Customization / other functions
Normal and Loud modes
• There are two EQ modes for your Fugoo Bluetooth Speaker. Normal mode is the
default, and is designed for best overall sound with most types of music. Loud mode
is quite a bit louder, and is ideal for playing music outdoors, and in large rooms.
Both modes employ dynamic realtime equalization to boost the loudness of songs
that have been recorded at lower volume levels.
• To switch from one mode to the other, start with the speaker off, then press and hold
the Action (O) button and press the power button. The speaker will turn on, and
announce which mode it's in.
Voice prompts level
• There are three voice prompt levels: Normal, Low and Off. Normal is the factory
default volume level – the level for voice prompts you will hear when you first turn on
your Fugoo Bluetooth Speaker. The Low level is about 20% lower than the Normal
level.
• To change the voice prompt level from Normal to Low, start with the speaker off,
then press and hold the – (volume down) and + (volume up) buttons, then also
press the (Power) button for one second. The speaker will turn on, and announce
that voice prompts have been set to Low.
• Follow the same steps as above to change the voice prompt level from Low to Off.
• Follow the same steps again to change the voice prompt level from Off to Normal.