User manual

User Manual Fugoo Bluetooth Speaker model FSNA1 page 5 10/8/2014
Charging your Fugoo Bluetooth Speaker
Checking the battery level
• Click the (Power) button momentarily . The LED indicator blinks green one to six
times to indicate the charge of the battery, unless battery is being charged.
• If voice prompts are enabled, the speaker responds with "Battery is almost full." or
another indication of the state of the battery’s charge, or “Battery is charging.”
• If the battery charge gets very low, the LED indicator will blink red, and after several
minutes, the speaker will say “Please recharge the battery. Powering off.”, and the
speaker will turn off to protect the battery.
LED indicator
Voice prompt
six green blinks
Battery is full.
five green blinks
Battery is almost full.
four green blinks
Battery is three quarters.
three green blinks
Battery is half.
two green blinks
Battery is one quarter.
one green blink
Battery is low.
• While the speaker’s battery is being charged, the LED will slowly pulse on/off green.
• When the speaker’s battery has reached full charge, the LED will glow solid green.
Charging your speaker
• Connect the Micro-USB charging cable to the speaker and to the supplied AC adapter.
• Plug the AC adapter into a power outlet.
• The LED blinks green during charging.
• The LED glows solid green once the battery is fully charged.
• CAUTION: Never use your Fugoo Bluetooth Speaker without one of its jackets
(Style, Sport, or Tough). The jacket is an essential part of your speaker because it
protects the speaker drivers from damage. The tweeters, especially, could be
damaged by a thumbnail, or by contact with any other relatively hard-edged object.