Operator`s manual
Troubleshooting - 24
Symptom Solution
Unit will not
power up
1. Check power cable plug is rmly plugged into
the back of the amplier.
2. Check that power cable is rmly plugged into
wall outlet.
3. Check the unit on another wall outlet in another
room.
4. If using the BT-6 be sure the voltage selector
switch is displaying the voltage for your country.
(North America should be 115V Most of Europe
should be 230V). If unsure switch voltage
is correct for your country consult a licensed
electrician.
Audio is
Distorted
Reduce the device supplying the signal or reduce
the volume on the BlueTube amplier.
Turntable is
really quiet
1. Check that you are using a preamp if your turn
table requires one.
2. Consult the manual supplied with your turn
table and preamp.