Operator`s manual

9 - Rear Panel
Connections
Note:
• Do not plug in the power cord until all connections have been
completed.
• When making connections, also refer to the operating instructions of
the other devices being connected.
• Be sure to connect the left and right channels properly (left with left,
right with right).
• Do not bundle power cords together with other cables. Doing so can
result in noise.
Rear Panel
1. Sub-woofer Output
2. Aux 1 input
3. Aux 2 input
4. USB Charger
5. Right Speaker Output
6. Left Speaker Output
7. 115V/230V voltage selector
(BT-6 only)
8. IEC Power connector/fuse
9. Cooling vents - DO NOT
BLOCK