Manualshelf

Use and Care Manual

ManualsBrandsBLUETTI ManualsBattery Generators3000W Continuous/6000W Push Button Start LiFePO4 UPS Battery Backup Peak Output Power Station White, 2400W MPPT Solar
21222324252627282930
21
Just Power On
@1500W/100Vac , @1800W/120Vac Max .
The charging process will automatically stop when it reaches 100% capacity.
Additionally, you can choose to access the BLUETTI Sub Panel or the L14-30
receptacle, the maximum charging power allowed will be up to 3000W.
Charging via wall outlet
Charging via Sub Panel
Main
Panel
Sub
Panel
8.1.2. Charging Method 2: From Generator (gasoline, propane, or diesel)
● Connect the EP500Pro from CP1 via the generator charging cable (sold
spearately) to the AC output of the generator. The charging process will
automatically stop when it reaches 100%.
● The required output power of your generator has to exceed the Max. input
power of the AC input port of the EP500pro. Also a generator with a pure sine
wave output is recommended (e.g. Inverted-based Generators)
Voltage limit:
85-110VAC/JP(100VAC), 102-132VAC/US(120VAC), 207-253VAC/EU/UK/AU.
Frequency limit: 47Hz-53Hz(50Hz), 57Hz-63Hz(60Hz).
(Charging via Generator)